Post by Trey Lawler on Nov 23, 2005 16:08:22 GMT -5
When setting a Ross bow to spec. Use the following:
Set ATA over BH on:
CR331 (ATA - 31", BH - 7.75")
CR334 (ATA - 34", BH - 7.75")
CR337 (ATA - 37", BH - 7.75")
Cam Orientation.
CR331 - method 1
CR334 - method 1
CR337 - method 1
Method 1:
Cam orientation is set by rotating the cam until the outer edge of the inside module screw is inline with the edge of the limb fork. (as pictured above)
Set ATA over BH on:
CR331 (ATA - 31", BH - 7.75")
CR334 (ATA - 34", BH - 7.75")
CR337 (ATA - 37", BH - 7.75")
Cam Orientation.
CR331 - method 1
CR334 - method 1
CR337 - method 1
Method 1:
Cam orientation is set by rotating the cam until the outer edge of the inside module screw is inline with the edge of the limb fork. (as pictured above)