olink
New Member
Posts: 1
|
Post by olink on Feb 14, 2007 21:23:51 GMT -5
When setting the module bolt head tangent to the inner limb face... Is this only done at peak weight or should the bolt also be set tangent when the weight is backed off? (When lowering the draw weight the bolt head rotates slightly under the limb.) Thanks!
|
|
|
Post by eagle48 on Feb 15, 2007 17:16:10 GMT -5
All specs should be taken with the limb bolts maxed out. In other words, the module should be tangent at max poundage.
|
|